Alesis SamplePad 4 | Saving & Retaining Auto-Shutdown Settings


In this guide, we will go through the steps to save and retain the Auto-Shutdown settings on the SamplePad 4.



  1. Press the【UP】and【LEFT】buttons simultaneously to enter the OPTION page:

 

  1. Select the “OTHER” option:

 

  1. Use the【UP/DOWN】buttons to select the “AUTO-SHUTDOWN” option, and press the【RIGHT】 button to enter the “AUTO-SHUTDOWN” settings. Using the buttons, change the Auto-Shutdown selection to “OFF”:


  1. Press the【DOWN】and【RIGHT】buttons simultaneously to enter the SAVE page:

 
  1. Use the 【UP/DOWN】buttons to select the “SAVE GLOBAL” option, then press the 【RIGHT】buttons to enter the save confirmation page:



  1. Use the 【UP/DOWN】 buttons to select the “YES” option, and the page will prompt that the save was successful.

  1. Power off your SamplePad 4, then power it back on to check and confirm that the Auto-Shutdown settings have been saved.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article